What is the name of the wireless technology for connecting to the Internet. What type of connection should I specify when configuring the router? We find out the necessary information that will be useful in the setup process

The cost of network access depends on the type of Internet connection. In the very general view The types are divided into wired and wireless. The first group includes all connection methods associated with pulling the cable to the subscriber's apartment. The cable can be telephone or intended only for the Internet, such a line is called a dedicated line. Wireless connection is setting up network access through a special antenna. In the article, we talk about the listed options in more detail and advise which type of Internet connection is better to choose.

Find providers that connect home Internet at your address:

Start typing street or city


What are the types of Internet connection

Dial-up access

This is a dial-up connection over the telephone network. To configure, you must have home phone and a telecom operator whose equipment is powerful enough to provide access to the network.

The disadvantage of dial-up communication is that the connection to the network occurs through the same line as dial-up. Therefore, the simultaneous use of the Internet and the phone is not possible. In addition, on average, such a connection allows you to access the network at a speed of up to 56 Kbps. Few online games work with this connection, and downloading files can take several weeks.

Dial-up connections are now common in areas where population density or specific areas do not allow broadband Internet access.


Asymmetric Digital Subscriber Line Connection

In another way, it is called ADSL. This is another type of dial-up connection. It also requires a telephone line, but a digital modem allows you to dial in and out at the same time. The line bandwidth with this type of Internet connection is higher than in the method described above. It provides the subscriber with a sufficiently high speed of access to the network - on average, up to 24 Mbit / s. The load on the line is distributed asymmetrically - the incoming connection is faster than the outgoing one (speed up to 1.4 Mbit / s). Because of this, it takes longer to upload files to the server.


Cable TV connection

This is the type of access provided according to the DOCSIS standard - data transmission through a television cable. Usually it is used in the absence of Internet providers in the house. With its help, you can get the speed from 27 to 50 Mbit / s. To set up access, you need a cable TV in the house and a special modem.


Access via Ethernet cable

Ethernet is a dedicated line. It is used to connect a computer to a network directly or via a Wi-Fi router. The bandwidth of such a channel is higher than in the case of ADSL or TV cable. Data transfer speed from 50 Mbit / s in both directions - both from the computer to the server, and vice versa. You can only connect if you have broadband internet at the subscriber's house.


Connecting via GPON

GPON is a technology for configuring network access through a personal fiber optic line. It is conducted from the provider's equipment directly to the subscriber's apartment. This type of network connection setup provides a maximum data transfer rate of up to 1 Gb / s. To connect, it is necessary to stretch a cable from the common line to the subscriber's apartment and install an optical modem. The technology is not yet available in all regions.

Fiber and twisted pair connections are more common than GPON. At the same time, the optical cable is pulled to the apartment building, and the Internet is bred for subscribers using a twisted pair. The bandwidth of such a channel is lower.


Setting Up Antenna Access

This group includes radio, mobile, satellite Internet. Antennas are required to configure access using the listed channels.

The radio internet operates through an access point provided by the provider. The signal from it spreads over a certain radius and enters the subscriber's equipment through the antenna installed in the apartment. Then, using the modem, the signal is sent to the computer. If the access point is far away, the signal may be too weak. In this case, in addition to the antenna, signal amplifiers are used.

Mobile communication works through antennas installed in cell phones or USB modems, no additional equipment is required. This type of connection to the Internet is the most affordable, but it has a low bandwidth in comparison with a wired connection via a dedicated line.

Satellite communication is established through outdoor antennas aimed at the satellite. Due to the long distances that the signal must travel, it usually arrives with a delay. Other disadvantages of connection include low connection speed, unstable operation in bad weather, high cost of equipment and subscription fees. However, in some areas, satellite is the only available connection channel.


How to find out the type of internet connection

If your device is connected to a network, you can find out the access method through the settings. Just go to Network and Sharing Center for Windows computers or Network for Mac. There will be information about the available connection options and the current connection method. If at the moment the Internet is not working or you need more detailed information, please contact the service technical support your provider.

What type of internet connection to choose

Much depends on the carriers available in your home and your needs. Dial-up access provides low speed connections and inconvenient to use. It can only be selected if other types of network settings are not available to you.

If you want to connect to the Internet via your phone, ADSL is more suitable. Through this channel, you will get a speed sufficient for normal surfing: launching most online games, downloading movies, watching online videos. If you plan to use “smart home” technology and want to set up digital TV via the Internet, learn about the possibility of replacing the telephone cable with fiber optic using GPON technology, while simultaneously connecting the telephone, Internet and television. It will cost more, but all three services will be provided through one cable. The throughput of such a line is much higher than that of analogs.

If you do not have the opportunity to lead a wire into the apartment, consider radio Internet or mobile communication... The disadvantage of the former is in the need to install an antenna at home, the disadvantage of the latter is the low connection speed.

Satellite access should only be considered if you do not have the ability to connect to the network in another way.

How to determine the type of internet connection available in your home

Use the form for selecting a provider at the address of residence on our website. Enter the city name, street and house number. The system will automatically select a list of available telecom operators for you. You can view their tariffs, get advice about the service and sign up for a connection.

The Internet has long ceased to be some kind of addition to our life, becoming its integral part. Too many mundane activities and entertainment depend on the World Wide Web. But in order to enter it, you need something more than a plug in a power outlet.

Consider the main types of Internet connection: features, equipment used and user reviews for one type or another. The options are not very diverse, but nevertheless, everyone can choose something of their own for specific goals and conditions.

Cable connection

This is the most popular type of internet connection. The provider serving your area conducts a cable to your apartment, through which the signal enters the house. In such cases, as a rule, only two connection options are used - through an optical cable and through a twisted pair.

Twisted pair

As for that, everything is simple here. A twisted cable (copper) is drawn from the junction box at the entrance and connected to your system unit or router. Almost all multi-storey buildings are connected in this way. Finding out what type of Internet connection (cable) in this case is very simple: if you have thin wires (compared to fiber) and an average speed of up to 100 Mbps, then there is a twisted pair. If the loop is thicker and the speed is higher, then it is optical fiber.

Optical cable

In another case, "optics" are brought into the apartment, which is connected to a special junction box directly in the house. This type of Internet connection has one very serious advantage - the speed, which can go up to 1 Gbps.

Through an optical cable, you can easily get not only access to the World Wide Web, but also use telephony and television services. That is, instead of three laid cables, you get one.

In turn, the cable type of Internet connection has two options for working with network protocols - local and virtual. Let's consider them in more detail.

The local network

The whole point of local protocols is that your telecom provider simply assigns you a separate IP address. The provider includes all computers in one large network, where he can safely control each address. In addition, this type of Internet connection is distinguished by the presence of a dynamic or static IP.

The dynamic option is the simplest, because everything falls on the shoulders of the provider himself, and the user does not need to adjust anything himself. How to find out the type of internet connection in this case? If you plugged the cable into a computer or router and after a couple of seconds got access to the World Wide Web, then you have a dynamic IP, otherwise operating system will ask for additional login parameters.

The static option is more finicky in terms of access. Before each session, the system will request data to access the Internet, which the provider should have provided you. They do not change, so it is enough to enter them once, and in the future the operating system will itself gain access to the network.

This option is most convenient for online services that constantly ask you for a static IP address. How do you know what type of internet connection is in this case? Most modern routers are able to determine the type of connection and inform the owner about it. If you are using outdated or frankly budget equipment, then you can simply call your provider and clarify all the information you are interested in. They will also help you understand the competitive model of the router and tell you how to find out the type of Internet connection on your device.

Judging by user reviews on numerous specialized forums, providers prefer to "put" subscribers on a static IP. For example, the same "Rostelecom" (the type of Internet connection - cable) polls introduces the Internet only for "static", because in this case, tracking each individual user is much easier in terms of subscription fees and the provision of some additional services. As for the connection quality itself, a lot depends on the cable used (fiber / twisted pair) and your equipment (router / network card).

Virtual network

Virtual private network, or, in other words, VPN, are encrypted communication protocols, where the exchange of all information between the user's computer and the provider is encrypted, significantly increasing the security on the network. There are two main types of VPN connections - PPPoE and PPTP (L2TP).

One of the most popular types of virtual networks are PPPoE protocols. To connect to the Internet, you only need a username and password. The Windows platform recognizes this type as conditional dialing.

A much less popular type is PPTP (L2TP), because when entering a password with a login, the user must specify the exact address of the provider's server. Another distinguishing feature of the PPTP connection is the encryption method, which is fundamentally different from PPPoE. One of the most famous providers working on this protocol is Beeline (home Internet). The type of connection from other providers may also vary depending on the conditions of the area (proximity of the tower, required speed, etc.).

Reviews about this type of connection vary greatly. Some people are quite satisfied with the frequently changing data rate (watching a video, working with text information, etc.), but for some it is a critical moment. The latter are, as a rule, gamers who need low ping (server response latency), that is, good.For example, if you have an MTS Internet connection type via a VPN connection (flash modem), then in popular games of the MOBA League genre of Legends and DOTA ping will range from 90 to 120 ms. While by means of a cable connection, the response time does not exceed 40-60 ms.

Combined connection

This type includes several types of Internet connections. Virtual network here it is the priority type of connection, and dynamic or static IP addresses are used as an additional resource. That is, the difference between them lies in the manual or automatic input of data about the provider's server.

This type is considered one of the most difficult and is rarely used. It is often used municipal services with a multi-level office structure: Pension Fund, gas services, employment centers, etc.

Phone line

Fiber optic cable seriously dominates over telephone lines, but for a number of reasons (rural area, remote settlement, etc.), it is inappropriate for a provider to pull an expensive Internet cable. In this case, the presence of a home phone, that is, an ADSL or Dial-Up connection, somehow helps.

An ADSL connection allows you to surf the Internet at a low speed, about ten megabits. For most ordinary tasks, this is quite enough. For full-fledged network operation, a modem is required and In order for both devices to function simultaneously and correctly (a computer with a network and a telephone), a splitter is required that branches the loops to both the home phone and the system unit.

Dial-Up connection is what is called last century... In this case, if you are surfing the Internet, the telephone line will be busy. In addition, the data transfer rate is limited to 56 Kbps, which, by today's standards, is very, very small. Despite all the disadvantages of a Dial-Up connection, it is sometimes used in difficult-to-reach areas.

Judging by user reviews, this method of connection is practically not in demand, because even watching videos on the YouTube channel in low resolution is a real problem. The only thing you can count on with such a connection is only letters, pictures and music in a low bitrate.

Satellite Internet

One of the most expensive types of connections, but almost ubiquitous. The satellite dish allows you to access the World Wide Web even in the wilderness, where there are no simple communications. The only condition is good visibility of the orbiting satellite, which is not a problem for a venerable provider.

Surely many are familiar with satellite television firsthand. In the case of the Internet, the principle is the same, with the only difference that a unit with a transmitting head is additionally installed on the plate for transmitting data in both directions.

The speed of the channel is measured in tens of megabits. One of the main disadvantages of this type of connection is sky-high rates and expensive equipment.

Wi-Fi

Many are probably familiar with the "Wi-Fi" protocols. Someone has a router at home, and someone uses free entry points to in public places... "Wi-Fi" covers, as a rule, areas that are difficult to reach for cable connection, such as cottage settlements and other private sectors. For work, the operator sets up base stations that provide a network of a nearby area within a radius of five to ten kilometers.

To connect, you need a special receiver, and if you are at a considerable distance from the base station, then a special antenna that amplifies the signal will not interfere.

Dial-up connection via modem. Today, the cheapest way to connect to the Internet is access to the provider's computer via analog and analog-digital lines of telephone networks via a modem. The oldest session (dial-up) method of connecting to the Internet has disadvantages: low speed and a busy line. The upper speed limit is 56 Kbps.

Dial-up connection via ADSL (Asymmetric Digital Subscriber Line) allows data transfer at speeds up to 9 Mbps in the forward direction and 1 Mbps in the reverse direction over regular telephone lines.

Dial-up connection via ISDN (Integrated Services Digital Network) allows connection to the Internet over networks in which the access line to the ISDN can be completely digital. This allows you to transfer a digital signal from one computer to another without conversion. Due to this, information is transmitted at a speed of up to 384 Kbps.

Leased line connection. You get the opportunity to use the Internet 24 hours a day without paying for the services of the telephone company at a temporary rate. In this case, a fiber-optic cable is laid up to the user's premises. In this case, the speed and quality of transmission over the channel is guaranteed.

Frame relay connection. In case of uneven information load of lines, it is often more profitable to use a connection via frame relay networks ("variable structure"). The principle of operation of such networks is simple: the minimum guaranteed channel capacity is determined, and if necessary, the bandwidth is expanded to possible limits. Such "forced" information transfer is allowed if the line is not loaded by other users. The expediency of using such networks in a small office is obvious, where the likelihood of several services simultaneously accessing the network is low. From a financial point of view, a frame relay network is quite beneficial.

Connection via cable TV networks. If this technology is implemented, we immediately receive a TV, telephone and Internet. The transmission speeds enable high-quality Internet telephony, real-time video conferencing, broadcasting of TV programs on the World Wide Web. Data transmission is carried out through the HFC (Hybrid Fiber Coaxial) cable - a combined optocoaxial cable. In this case, the data transfer protocol will remain IP (Internet Protocol) or newer protocols.

Connection via radio modem. This method will get rid of the telephone company.

Widespread Connectionthrough mobile devices.

Internet services

Internet services or services generally refer to the types of services that are provided by servers on the network. The following are the oldest services available since the birth of the network:

1. Usenet (newsgroups, newsgroups) - an outdated service that allows you to organize network discussions on certain topics.

2. FTP - file transfer service.) Allows you to transfer and receive files from file FTP servers connected to the Internet.

3. Telnet - service remote access to computers.

4. Electronic mail (e-mail) is a message transfer service.

5. World Wide Web (WWW, Web, " The World Wide Web») - a service for searching and viewing hypertext documents, including graphics, sound and video.

Of the above services, the last two remain popular until now. Other services and services have been added to them. Currently, the most popular services can be arranged in the following order: Email. WWW (search engines, news sites, forums, blogs, social networks), IRC messaging services (chats), Internet shops, electronic payment systems, Internet telephony. In addition, among the popular modern services, one can name instant messaging (ICQ, GoogleTalk, Skype), wikis, message boards, Internet TV, social networking services, virtual dating service, accurate time service, distributed computing, cloud computing, YouTube, etc.

Sometimes you need to know what kind of Internet connection you are using, for example, there are programs that can request such information. It is not at all difficult to find out, and the instructions are given below.

You will need

  • internet service provider, internet connection

Instructions

  • The easiest way is to ask your system administrator (if you are at work) or call your ISP if you are at home.
  • If this is not possible, click "Start". In the menu that opens, select "Control Panel" (in Windows XP, you first need to click "Settings").
  • Select "Network and Internet Connection" (may be called "Network and Sharing Center", depending on the version of Windows).
  • In the new menu, select "Network Connections" or "Manage Network Connections" (again, depending on the version of Windows, in Windows 7 it may be called "Changing adapter settings").
  • There you will see your connection type. For example PPPOE (high speed connection) or PPTP (VPN).
  • Another possible variant- hover the mouse over the internet connection icon (usually located immediately to the left of the volume icon in the bottom panel). Click on the icon once. The first line displays the network you are connected to, and the second displays the type of connection. If you need more detailed information- click on the inscription at the very bottom of the window, a menu opens, in the left pane select "Change adapter settings".
  • If you require Additional Information, for example, your IP address, you can easily find it out on specialized sites. Enter the query into the search engine: "my IP". The necessary sites will be displayed as the first or second line in the search engine results. There you can find a lot of additional information.
  • From time to time I am asked about what methods of Internet connection exist and what type of access to the global network is better to choose for a country house or a house located within the city limits. Indeed, the IT market is literally overgrown with companies that provide Internet access services. What technologies are not used today in wireless and wired connections in order to maximize coverage of a hard-to-reach area, increase data transmission speed, improve communication quality ...

    As you know, Internet providers differ in the provision of services, namely the type of access to the Internet.

    Internet service provider - a company that provides Internet access to its client and provides other related services.

    There are types of Internet connections such as broadband, dial-up and wireless. All of them are able to open the world of the Internet to you, although they work on different principles. But first things first.

    Ethernet - local network connection.

    This is a fixed broadband Internet access via a dedicated line. The line laid by the provider is built on fiber-optic or copper cable, which makes it possible to transfer data to computers at high speed. The material for creating a fiber-optic cable is glass or plastic, and information on it is transmitted not by an electrical signal, but by a light signal, which makes it possible to transmit a signal over huge distances with negligible attenuation.

    A copper cable is a twisted pair (described here) through which information is transmitted by an electrical signal. Due to its peculiarity, twisted pair, unlike fiber optic cable, has a significant signal attenuation rate and is susceptible to electromagnetic interference. To increase the length of the communication channel, you should use cables with protection against interference and pickup, and to reduce the signal attenuation coefficient, you need to use special equalizers or signal buffers.

    However, do Internet providers do it in practice where it is needed? It should be said that usually a fiber-optic cable is used to connect a sub-provider with a backbone provider and connect various buildings (multi-storey buildings, hotels ...) to the global network, and then there is a twisted pair.

    True, the GPON technology (gigabit passive optical network) is already actively developing. Its essence lies in the fact that the provider starts the fiber-optic cable directly to your apartment and installs a special dividing box. In this situation, you technically have the opportunity to connect to the global network at a speed of 1 Gbps, in other cases the speed will not exceed 100 Mbps.

    Be that as it may, a dedicated line is most suitable for connecting to the Internet at home (read more about that) or getting shared access to the network in the office. As a rule, providers with this type of connection offer unlimited Internet, which means you will not need to worry about wasted network traffic downloading information or walking on the network. At Wi-Fi assistance other digital devices (smartphone, tablet, laptop, Smart TV ...) can be connected to the Internet.

    The high speed of the Internet channel in Ethernet technology makes it possible to quickly download impressive amounts of information, comfortably work in the network with multimedia and hold various video meetings online. Many providers providing Internet access via a dedicated line offer ip-television (IPTV) as an additional service, where some channels can be presented in HD format. Perhaps this is one of better ways Internet connection.

    Modem connection (ADSL and Dial-Up).

    This is a dial-up Internet access via a telephone line using a modem. Connect to the Internet via telephone line you can use the old Dial-Up technology or the more advanced ADSL technology. Connecting with a provider using ADSL, in contrast to Dial-UP, makes it possible to surf the Internet and simultaneously make phone calls. This is achieved through an ADSL splitter that splits the telephone signal into a regular telephone signal and a high-frequency modem signal.

    Compared to a dedicated line connection (the method is described above), the advantage of a modem connection is that existing telephone cables are used, but this is where the advantage of this Internet access ends. The maximum data transfer rate for Dial-Up is 56 Kbps, and for ADSL technology is 24 Mbps, but given the state in which the telephone lines are located, the stability of the connection and such indicators may not be.


    As you understand, the telephone line loses to the leased line in all respects, given the stable growth of multimedia and the volume of transmitted data. Just a few years ago, this type of connection was considered one of the best, but today it has practically outlived its usefulness, despite the fact that it is still used as an alternative connection to the Internet where, for some reason, it is not relevant to use another connection.

    Internet connection using DOCSIS technology.

    Literally DOCSIS (Data Over Cable Service Interface Specifications) is translated as a standard for data transmission over coaxial (television) cable. Data transmission according to this standard from the provider is carried out to the client (downstream) at a speed of 42/38 Mbit / s, and from the user (upstream) 10/9 Mbit / s. It should be said that the bandwidth in this technology is divided between all connected participants who are currently receiving or sending information flow. Therefore, the available bandwidth at the time of transmission or reception of data for each user can vary widely.

    This method of connecting to the Internet, like the previous one, is performed through a special modem. It is a cable modem for DOCSIS technology with a built-in network bridge, which enables two-way communication over coaxial or optical cable. It should be noted that in the network of such a provider there is a CMTS device - Cable Modem Termination System. In short and simple, then this device is a large modem in the backbone network to which the subscribers' modems are attached.


    From an economic point of view, laying a coaxial cable in order to get access to the Internet is not very reasonable, it is better to have a dedicated line (ethernet connection), because technical specifications such a line is better, but if a television cable is already in the house and your KTV operator provides such a service, then why not use it. However, if the provider can provide you with access to the Internet using FTTB, PON or HCNA technology, then for a number technical advantages it is better to choose one of them instead of the traditional DOCSIS.

    Mobile Internet access (GPRS, EDGE, 3G).

    This type of Internet connection is popular because it makes it possible to get access to the Internet in areas where there is no telephone or dedicated line. You can connect to an Internet provider using a USB 3G modem or a mobile phone (iPhone, smartphone, communicator) with a modem function. A USB modem is visually similar to a USB flash drive and has a SIM card slot inside.

    Internet connection, via USB modem or mobile phone performed by "addressing" the operator's base station cellular which you are servicing, and depending on what equipment is installed at the mobile provider, communication is established using GPRS, EDGE, 3G or HSDPA (4G) technology. Thus, after connecting a USB modem or phone (via a USB cable, infrared port or Blurtooth) with a computer, you will get access to the Internet using one of the mentioned technologies.


    The mobile Internet has an unstable connection quality and a rather low speed, but it is quite suitable for normal loading of pages into the browser. The maximum data transfer rate in the presented technologies is on average 20-40 Kbps in GPRS; 100-236 Kbps in EDGE; 144 Kbps - 3.6 Mbps in 3G and 4G can exceed 100 Mbps, and for stationary subscribers it can be 1 Gbps.

    The speed characteristics, depending on the technologies used by the Internet provider, in some cases can be higher, but in practice they are most often lower. The mobile Internet, of course, has many drawbacks, but to be able to access global network from anywhere in the country, many of us captivate.

    Now let's analyze the wireless Internet connection (satellite, WiMAX). These types of wireless Internet connection are good because they can be used where it is not yet possible to access the network via cable for some reason.

    Using wireless technologies, you can access the Internet outside the city, where wired Internet not available. For example, in a summer cottage, warehouse, office or some other facility. I must say that such methods of connecting the Internet assume the presence additional equipment, and its purchase in some cases can "pour out" for you a round sum.

    Internet via satellite dish.

    For example, to connect a one-way satellite Internet, you need a small set of equipment. You need to buy a satellite dish, a converter amplifier (matched to the C, Ka or Ku band and the operator's linear or circular polarization), a satellite receiver (PCI card or USB receiver), an RG-6 cable of the required length (75 Ohm) and a pair F-connectors.

    For two-way access to satellite Internet, you need a transceiver antenna (about 1.2 - 1.8 meters in diameter), a transmitting BUC (block-up converter) and a receiving LNB (low-noise block) block and a satellite modem, to which more than one can be connected , and several computers and provide them with Internet access. Use the range recommended by the satellite operator.


    Each of the quiet satellite internet connections has its own characteristics. For one-way access, you need an existing Internet access (for example, GPRS or EDGE), through which the sent requests will be processed by the Internet provider (one-way access), and after processing the received data will be sent to your client via the satellite corridor.


    With two-way Internet access, additional channels are not needed, since data is sent and received via satellite. Many satellite internet operators can offer both unlimited packages and pay-per-traffic tariffs. Two-way satellite Internet for some operators works faster than in 3G technology, and the speed in Ka-band can be up to 20 Mbps.

    The disadvantage of this technology can be considered high cost equipment, the complexity of setting up the equipment for a technically inexperienced user and a long response time (latency). Usually they use satellite Internet in remote parts of the country, where there is no other acceptable alternative. Using a Wi-Fi router with a satellite connection to an ISP, as well as in other technologies, will give you the ability to distribute the Internet wirelessly and LAN cable to other digital devices (laptop, tablet) in the house.

    We have already reviewed with you different ways of connecting to the Internet, including here and mobile access, but I would like to draw your attention to another type of Internet connection using WiMax technology. Often, this Internet access technology is used where DOCSIS cable Internet is not available, there is no dedicated network in the home or office, or there is no telephone line for ADSL connection. Access to the global network using WiMax technology, as well as a satellite connection, in such cases often plays a decisive role.

    WiMax technology theoretically has a data transfer rate of about 70 Mbit / s, but in practice this speed is several times lower. To connect to the Internet using WiMax technology, you need to contact the providing provider, who, using the network coverage map, will determine whether your location is within the coverage area. If it turns out that your location does not fall within the coverage area, then specialists will need to determine the distance to the nearest base station to you.

    It is desirable that the base station is in line of sight (not necessarily) from you, and the distance is no more than 10 kilometers. Depending on the results obtained (distance and condition of signal reception), you will need to select a WiMax modem and an antenna with the required gain. In addition, you will need a cable to connect the antenna to the modem and a USB extension cable to connect the modem to a router or computer.


    The antenna is usually installed at the highest possible point and directed (for the calculation, the Google Earth program can be used) it as accurately as possible to the base station. After that, the antenna connects to the modem, connects to the network and adjusts to the maximum signal level. Very often, to receive the Internet via WiMax, a specialized Wi-Fi router with a USB port is used, which can work as a WiMax modem.

    So wirelessly Wi-Fi networks(read if) you can open Internet access to other digital devices (tablet, laptop ...). Both Wi-Fi and WiMax technologies are wireless and are used to gain access to the Internet, but despite this they solve a different range of problems. Typically, Wi-Fi is used to build wireless local area networks with a radius of action depending on environment from 50 to 100 meters.

    Unlike WiMax, Wi-Fi technology is used by Internet providers a little, but this type of wireless Internet connection has gained great popularity in hotels, airports, cafes, clubs, apartments and houses. Because this technology allows you to quickly, easily and conveniently provide everyone who wants to go to the global network wireless internet... Check out the comparison chart of these standards and read.

    Now, in general terms, you know what methods of Internet connection exist. Undoubtedly Information Technology do not stand still, but are rapidly developing in our world and the data transfer rate is constantly growing.

      2018-09-05T13: 52: 24 + 00: 00

      Guys are such bullshit. I bought the Internet 1000 Mbps what happens if I connect it to a router that only pulls 100 Mbps?

      2018-08-15T17: 46: 57 + 00: 00

      People, but you can add traffic from the network and from mobile internet? The Internet is slow at work, but lags on the phone. At the same time, how can it be tamped into one channel?

      2018-06-20T23: 07: 08 + 00: 00

      This article really needs to be completed, but I don’t have time for that yet. If you manage to assemble a team, then the entire article will be rewritten or supplemented. In the meantime, everyone is free to supplement it in the comments, but there are not many of them, but there are many more critics. But this is good, because I point out mistakes, which means there is room to grow.

      2018-06-16T16: 07: 22 + 00: 00

      Dmitry, what the hell is a satellite dish I mean. It's a hundred times cheaper to make a transfer over a cable. And Kizeev meant Kharchenko's antennas or a wave channel (Yaga). Do you agree? And for the article, thank you. Just about the dedicated line (Ethernet) in more detail: it is expensive and there is a stat. IP address?

      2017-12-15T15: 51: 45 + 00: 00

      Hello Dmitry. I read a lot of reviews, but only yours interested me. Since I am a lonely pensioner, one cable is enough for me, an ordinary Internet connection without a router, but everywhere there is only a router and a fiberglass cable, and this, accordingly, is the price. Now I have a Beeline, but all the time there are some tricks - I pay only 450 rubles. but you need 900 rubles. And so I'm spinning with my pension: I have to pay for a mobile phone and for electricity and utilities. So I'm getting it. And we, pensioners, also want to live, of course, not like everyone else, but we try not to hit our faces in the dirt. Sorry. Perhaps you have your own business, and you are not up to us. Sincerely, Ludmila